skin lightning treatment

Introduction

Microdermabrasion, also known as skin polishing, is a popular cosmetic procedure that helps rejuvenate the skin and improve its texture and appearance. This non-invasive treatment involves exfoliating the outermost layer of the skin using a specialized device, typically with tiny crystals or a diamond-tipped wand. The procedure is gentle yet effective, making it suitable for various skin types and concerns.

What is Microderma Abrasion/ Skin Polishing?

Microdermabrasion, also known as skin polishing, is a non-invasive cosmetic procedure that helps improve the texture and appearance of the skin. It involves the use of a specialized device that gently exfoliates the outermost layer of the skin, removing dead skin cells and stimulating the production of new, healthy skin cells.

The procedure typically uses either a handheld device with a diamond-tipped wand or a device that emits tiny crystals onto the skin. These abrasive materials, along with suction, effectively remove the dead skin cells, unclog pores, and improve skin tone and texture.

Microderma Abrasion/ Skin Polishing Procedure

  1. Cleansing: The treatment area is thoroughly cleansed to remove any makeup, dirt, or oils from the skin.

  2. Exfoliation: The handheld device, which is equipped with a diamond-tipped or crystal-tipped wand, is passed over the skin. The wand gently exfoliates the outer layer of the skin, removing dead skin cells and promoting cell renewal.

  3. Vacuum suction: The device also has a vacuum suction mechanism that helps to remove the exfoliated skin cells and unclog pores. This suction stimulates blood circulation and lymphatic drainage, further promoting skin rejuvenation.

  4. Targeted areas: The aesthetician or dermatologist will focus on specific areas of concern, such as fine lines, wrinkles, acne scars, hyperpigmentation, or uneven skin texture. The intensity of the treatment can be adjusted based on the individual’s skin type and sensitivity.

  5. Multiple sessions: Microdermabrasion or skin polishing is often performed in a series of sessions to achieve optimal results. The number of sessions required may vary depending on the individual’s skin condition and desired outcome. Typically, sessions are spaced a few weeks apart to allow the skin to heal and regenerate between treatments.

  6. Follow-up treatments: To maintain the results, periodic maintenance treatments may be recommended. These can help to sustain the benefits of the initial series of treatments and keep the skin looking refreshed and rejuvenated.

  7. Post-treatment care: After the procedure, a soothing moisturizer or hydrating mask may be applied to the treated skin. It is important to follow the skincare recommendations provided by the professional to protect the newly revealed skin and optimize the healing process.
Microderma AbrasionSkin Polishing Procedure
Microderma AbrasionSkin Polishing Procedure

Microderma Abrasion/ Skin Polishing Procedure

  1. Cleansing: The treatment area is thoroughly cleansed to remove any makeup, dirt, or oils from the skin.

  2. Exfoliation: The handheld device, which is equipped with a diamond-tipped or crystal-tipped wand, is passed over the skin. The wand gently exfoliates the outer layer of the skin, removing dead skin cells and promoting cell renewal.

  3. Vacuum suction: The device also has a vacuum suction mechanism that helps to remove the exfoliated skin cells and unclog pores. This suction stimulates blood circulation and lymphatic drainage, further promoting skin rejuvenation.

  4. Targeted areas: The aesthetician or dermatologist will focus on specific areas of concern, such as fine lines, wrinkles, acne scars, hyperpigmentation, or uneven skin texture. The intensity of the treatment can be adjusted based on the individual’s skin type and sensitivity.

  5. Multiple sessions: Microdermabrasion or skin polishing is often performed in a series of sessions to achieve optimal results. The number of sessions required may vary depending on the individual’s skin condition and desired outcome. Typically, sessions are spaced a few weeks apart to allow the skin to heal and regenerate between treatments.

  6. Follow-up treatments: To maintain the results, periodic maintenance treatments may be recommended. These can help to sustain the benefits of the initial series of treatments and keep the skin looking refreshed and rejuvenated.

  7. Post-treatment care: After the procedure, a soothing moisturizer or hydrating mask may be applied to the treated skin. It is important to follow the skincare recommendations provided by the professional to protect the newly revealed skin and optimize the healing process.

Benefits of Microderma Abrasion

  1. Exfoliation: The procedure effectively exfoliates the outer layer of dead skin cells, revealing fresher, smoother skin underneath. This helps to improve skin texture, making it feel softer and more youthful.

  2. Skin rejuvenation: By stimulating cell turnover and promoting the production of collagen and elastin, microdermabrasion helps to rejuvenate the skin. This can reduce the appearance of fine lines, wrinkles, and age spots, giving the skin a more youthful and radiant look.

  3. Diminished acne scars: Microdermabrasion can help to fade the appearance of acne scars and hyperpigmentation. The exfoliation process encourages the growth of new skin cells, which can gradually reduce the visibility of acne scars and promote a more even skin tone.

  4. Improved skin tone and texture: Uneven skin tone and rough texture can be improved through microdermabrasion. The treatment helps to remove surface irregularities and smoothes out rough patches, giving the skin a more even and refined appearance.

  5. Enhanced product absorption: By removing the outer layer of dead skin cells, microdermabrasion enhances the penetration of skincare products. This allows for better absorption of serums, moisturizers, and other topical treatments, maximizing their effectiveness.

  6. Non-invasive and quick procedure: Microdermabrasion is a non-invasive treatment that does not require anesthesia or extensive downtime. The procedure is typically quick, with each session lasting about 30 minutes to an hour, depending on the treatment area.

  7. Suitable for various skin types: Microdermabrasion is suitable for a wide range of skin types, including sensitive skin. It can be customized to address specific concerns and can be performed on the face, neck, chest, hands, and other body areas.

  8. Boosts confidence and self-esteem: The improvement in skin texture, tone, and overall appearance can boost confidence and self-esteem. Clearer, smoother skin can make individuals feel more comfortable and confident in their own skin.
Benefits of Microderma Abrasion

Side effects of Microderma Abrasion/ Skin Polishing

  1. Redness: After the procedure, you may experience temporary redness in the treated area. This is a normal response and usually subsides within a few hours to a day.

  2. Skin sensitivity: Your skin may feel more sensitive than usual following the treatment. This sensitivity is typically temporary and should resolve within a day or two.

  3. Dryness or flaking: Microdermabrasion can temporarily remove the top layer of dead skin cells, which may result in dryness or flaking. It is important to keep your skin moisturized and follow the post-treatment care instructions provided by your skincare professional.

  4. Temporary bruising: In some cases, individuals may experience mild bruising or discoloration in the treated area. This is usually temporary and resolves on its own within a few days.

  5. Increased sun sensitivity: Following microdermabrasion, your skin may be more sensitive to the sun. It is important to protect your skin by wearing sunscreen with a high SPF and avoiding prolonged sun exposure.

  6. Minor swelling: Some individuals may experience mild swelling after the treatment, which typically subsides within a day or two.

Pre-Care for Microderma Abrasion

  1. Redness: After the procedure, you may experience temporary redness in the treated area. This is a normal response and usually subsides within a few hours to a day.

  2. Skin sensitivity: Your skin may feel more sensitive than usual following the treatment. This sensitivity is typically temporary and should resolve within a day or two.

  3. Dryness or flaking: Microdermabrasion can temporarily remove the top layer of dead skin cells, which may result in dryness or flaking. It is important to keep your skin moisturized and follow the post-treatment care instructions provided by your skincare professional.

  4. Temporary bruising: In some cases, individuals may experience mild bruising or discoloration in the treated area. This is usually temporary and resolves on its own within a few days.

  5. Increased sun sensitivity: Following microdermabrasion, your skin may be more sensitive to the sun. It is important to protect your skin by wearing sunscreen with a high SPF and avoiding prolonged sun exposure.

  6. Minor swelling: Some individuals may experience mild swelling after the treatment, which typically subsides within a day or two.
Pre-Care for Microderma Abrasion
Pre-Care for Microderma Abrasion

After Care for Microderma Abrasion/ Skin Polishing

  1. Keep the treated area clean: Gently cleanse the treated area with a mild cleanser and lukewarm water. Avoid using harsh or abrasive products that can irritate the skin.

  2. Moisturize regularly: Apply a gentle, hydrating moisturizer to keep the skin moisturized and prevent dryness or flakiness. Look for products that are non-comedogenic and suitable for your skin type.

  3. Avoid sun exposure: Protect your skin from the sun’s harmful UV rays by wearing a broad-spectrum sunscreen with a high SPF. Cover the treated area with clothing or a wide-brimmed hat when going outside. It’s best to avoid prolonged sun exposure for at least a week after the treatment.

  4. Avoid harsh skincare products: Refrain from using harsh exfoliants, peels, or retinol products for a few days after the treatment. These can be too harsh for the freshly treated skin and may cause irritation.

  5. Don’t pick or scratch the treated area: Avoid picking, scratching, or exfoliating the treated area. Let the skin heal naturally without any interference.

  6. Stay hydrated: Drink plenty of water to keep your skin hydrated from within. This helps in the healing process and maintains the overall health of your skin.

  7. Follow post-treatment recommendations: Your skincare professional may provide specific post-treatment recommendations tailored to your skin’s needs. Follow their instructions regarding skincare products, makeup application, and any other guidelines they provide.

  8. Be gentle with your skin: During the healing process, be gentle when touching or cleansing the treated area. Avoid excessive rubbing or scrubbing that may irritate the skin.

Consult a Specialist Today

Hair loss may be distressing due to heredity, illness, or even stress. Our experienced dermatologists can assist you with hair loss treatments. Hair loss may be reversed if you visit our clinic as soon as you detect a problem. The sooner you start therapy, the better results you will give.

FAQ for Microderma Abrasion

Microdermabrasion is generally safe for all skin types. However, it’s important to consult with a skincare professional to determine if it is suitable for your specific skin concerns. They will assess your skin type, condition, and any potential contraindications to ensure the treatment is safe and effective for you.

Microdermabrasion is generally a non-painful procedure. Most individuals describe the sensation as a mild scratching or tingling feeling on the skin. However, the intensity may vary depending on your skin’s sensitivity and the depth of the treatment. Your skincare professional will ensure your comfort throughout the procedure.

Facebook
YouTube
Instagram
Scroll to Top

Get An Appointment

Open chat
1
Need Help
Scan the code
Hello 👋
Can we help you?